Three outgoing mail server -

For up to date info on Three mobile, best to check with them of course; http://www.three.com.au Below is accurate as of 24/11/2009.

These settings work in iphone on 3 Mobile. Make sure you have a data plan of course or data will cost you a bomb - as in thousands of dollars...EDIT - turning off roaming in setup does not disable national roaming - only international roaming. See here.

It is important to check the data plan that you have, including roaming charges. According to 3, you can tell when you are nationally roaming - "You’ll know you’re roaming on your iPhone when you see an E next to the signal bars."

Anyhow, enough warnings - the setup;

Go to settings>General>Network

Enable 3g>Then go to Cellular Data Network , in Cellular Data just fill in the APN field with 3netaccess. In MMS fill in the APN field with 3services and you should be finished.

Complete settings are as below but most except the APN name are irrelevant;

Access Point configuration details for each of 3mobile Australia’s mobile broadband services.

3 MMS:

Connection name: 3 MMS

Data bearer: Packet data

Access point name: 3services

User name: None

Prompt password: No

Password: leave this blank

Authentication: Normal

Homepage: http://mmsc.three.net.au:10021/mmsc

3 Mobile Internet:

Connection name: 3netaccess

Data bearer: Packet data

Access point name: 3netaccess

User name: None

Prompt password: No

Password: leave this blank

Authentication: Normal

Homepage: http://www.3mobile.com.au

Planet 3:

Connection name: Planet 3

Data bearer: Packet data

Access point name: 3services

User name: None

Prompt password: No

Password: leave this blank

Authentication: Normal

Homepage: http://three.net.au/

Three Email settings from this page;

How do I set-up my 3 email? - iPhone

1. Select Settings from the Menu screen

2. Scroll down and select Mail, Contacts, Calendars

3. Select Add Account

4. Select Other

5. Select Name: Type in your name, e.g: John Smith

6. Select Address: Type in your 3 email address, e.g: This e-mail address is being protected from spambots. You need JavaScript enabled to view it

7. Select Password: Type in your 4 digit messaging PIN, e.g: 1234

8. Select Save

9. Select IMAP

10. Select Incoming Mail Server, Host: Type in mail.three.net.au

11. Select User Name: Type in your 3 email address, e.g: This e-mail address is being protected from spambots. You need JavaScript enabled to view it

(the password should automatically be filled in, if not: Type in your 4 digit

messaging PIN, e.g: 1234)

12. Select Outgoing Mail Server, Host Name: Type in smtp.three.net.au

13. Select Save

14. The message “Cannot Connect Using SSL. Do you want to try setting up the

account without SSL.” Will come up a number of times, select YES. (after

pressing YES the iPhone will try and verify the account information until the

Mail, Contacts, Calendar screen comes up)

15. Select the new 3 Email Account

16. Scroll down to and select SMTP

17. Select smtp.three.net.au, it should show as the Primary Server

18. Select Use SSL: OFF

19. Select Server Port: 25

20. Select SMTP arrow at the top left of the screen to go back

21. Select 3 Email address arrow at the top left of the screen to go back

22. Select Advanced

23. Scroll down and select Use SSL: OFF

24. Select Server Port: 143

25. Select 3 Email address arrow at the top left of the screen to go back

26. Select Mail arrow at the top left of the screen to go back

27. Select Settings arrow at the top left of the screen to go back

28. Scroll up and select Fetch New Data

29. Select Push: ON

30. Select the frequency below, 15min, 30min, hourly, manually

31. Select Advanced

32. Select the 3 Email Address

33. Select Fetch

34. Go back by selecting the arrow in the top left of the screen to the Settings screen, push the menu button to go back to the Menu screen