Elastix has built-in support for Sangoma PCI-cards, you can verify that your Sangoma card is found by typing "lspci" in terminal and see that your Sangoma device is listed. By default Elastix doesn't recognize and show your Sangoma device in "System - Hardware Detection", for this reason you have to use steps below to make Elastix to see your device.

1. Log in to terminal

2. type "lspci" in terminal and verify that your Sangoma device in listed

3. run "wancfg_dahdi" Wanpipe configuration tool. Answer to questions based on your area/HW. When prompted "Would you like Wanrouter to automatically start on startup" You should answer "Yes".

4. Save the configuration file and your Wanpipe is configured.

5. Verify that Elastix sees your Sangoma device by opening your Elastix backend in browser and select "System - Hardware detection". If you don't see your devices ports listed in Hardware detection section try ticking boxes "Replace file chan_dahdi.conf" and "Detect Sangoma hardware", and click "Detect new hardware".

6. Try that everything works